How to Tie a Cobra Survival Weave DIY Projects Craft Ideas & How To’s for Home Decor with Videos

A paracord survival bracelet is a versatile tool that can come in handy for a number of emergency situations. Whether you are a survivalist, frequent hunter, outdoors person or just value the need to be prepared at all times, paracord bracelets are a great tool to have on at all times. In this tutorial, you will learn how to make the Cobra Survival Bracelet. When made correctly, this Cobra weave will quickly deploy to about 10 feet of paracord!

Also try our tutorials that show you how to make a Tire Tread Survival Bracelet and how to make an Oat Spike Bracelet

For the full list of survival bracelets – Check out our newest post here: How To Make Paracord Bracelets

How to make a Cobra Weave Paracord Survival Bracelet

Supplies you need:

10 feet of Paracord
Side release buckle
Tape Measure
Scissors
Lighter

Step 1:

Once you cut your paracord to the desired length (about 10 feet), seal the end using your lighter. You don’t want to be working with a frayed end. Now, measure your wrist size by taking one end of the paracord and wrap it around your wrist. Lay that section next to your measuring tape to see how many inches long your bracelet will be.

Check out How to Tie A Paracord Bracelet: Cobra Survival Weave at https://diyprojects.com/tie-cobra-survival-weave/

Step 2:

Let’s first attach the male buckle to the paracord. To do this, fold your piece of paracord in half and pull the ends through the bottom slot of the buckle.

Then pull the ends through the loop created by your paracord. Pull them all the way through until the paracord is secured around the buckle.

Step 3:

Now let’s attach the other end of the buckle. Pull the paracord through the slot on the buckle. Using your measuring tape, slide the buckle along the paracord until you reach you desired bracelet length.

For this example, the bracelet is 6.5 inches. Be sure to include the center of the male end of the buckle up to the end of the female buckle in your measurements. (See picture below)

Step 4:

Now we are ready to make our bracelet!

Pull the left strand under the center pieces and over the right strand.

Pull the right strand over the center pieces.

Pull the right strand over then under and through the left strand.

Step 5:

You made your first knot! Now let’s do the same thing, but start with the right strand.

Take the right strand and pull it under the center pieces and over the left strand.

Pull the left piece over the center pieces.

Take the left piece over the right piece then under and pull through the loop.

Step 6:

Repeat steps 4 and 5 until you get to the bottom buckle. Then follow the instructions below to complete your bracelet.

Step 7:

Using your scissors and lighter, cut and burn the ends.

Quick Deploy!

When in a survival situation, you may need every second to survive. So if you are in an emergency situation where your paracord bracelet will come in handy, you’ll want to be able to quickly deploy your bracelet.

Follow the steps below to find out how to quickly unravel your bracelet: